Do outdoor LED displays need cleaning? There is no doubt that the answer is yes. After using the outdoor LED display for a period of time, dust, impurities, dirt, etc. will adhere to the display screen body. If it is not cleaned up, it will adversely affect the normal operation of the LED display. In severe cases, it can even Causes damage to the display. Therefore, the outdoor LED module needs to be cleaned regularly to ensure the display effect of the LED display.
LED display cleaning is a high-altitude operation, which requires a professional cleaning team. The cleaning operation uses a high-altitude sling method (commonly known as spider man) or a gondola, equipped with professional cleaning equipment. The cleaning staff selects different cleaning agents for targeted cleaning according to different dirt on the screen, thereby ensuring that the LED tube is not damaged. Under the premise of masks and masks, the cleaning of outdoor LED displays is completed.
LED display cleaning is to remove accumulated dust and impurities, and precautions for cleaning the display.
First of all, consider purchasing a VDWALL A6000 cleaning kit with better quality. The cost of the cleaning solution generally includes electrolyte, high-purity distilled water, and antistatic liquid, which can effectively clean the dust and other stains on the LED display.
Some friends think that clear water is also possible, and it will not affect outdoor LED display Novastar TB8. However, the cleaning effect of clean water is relatively poor, and dust will adhere again after cleaning. At the same time, it should be noted that you must not spray water on the screen, but spray a little cleaning liquid on the cleaning cloth, and then gently wipe in the same direction. Before cleaning, you need to power the power cord Pull out.
Outdoor LED display cleaning and maintenance is divided into three steps:
- Vacuum : First suck and remove the dirt and dust on the surface of the LED display mask.
- Wet Cleaning : Use water spray and steam humidification to spray the display screen mask. Use a soft brush on the vacuum cleaner to scrub the lamp tube mask to clean the dirt.
- Dry : Use a vacuum cleaner to absorb the water drops and water marks left after wet cleaning to ensure that the display screen is clean and dust-free.